Food industry chemicals
Showing 1–20 of 32 results
-
Manual Dispenser, Alcofoam
Item Code: OP874$28.18White, wall mounted stylish dispenser, lockable. Quality design ensures long trouble-free service life. Compatible with 1 Ltr Soft Bottle Refills for Alcofoam Instant Hand Sanitiser.$28.18 (Excl. GST) -
1000 ml Ethasan Labelled Empty Spray Bottle
Item Code: HT032$17.64This is not just a standard spray bottle, but one especially for the Ethasan products. This is an empty bottle for you to refill from the Ethasan container and has a trigger with solvent resistant seals in it.The label has a synthetic stock and is laminated to ensure the any Ethasan on the outside of the bottle won't remove the text like you experience with paper labels.$17.64 (Excl. GST) -
Frontline - 20L/200L/1000L
Item Code: OP424$114.87 – $3,184.91FRONTLINE is a high foaming, solvated, alkaline detergent/sanitiser, which cuts fats and oils, removes grease, rail dirt, waxes, protective films, carbon and rubber.Features: * Economical in-use costs.* Powerful solvent and surfactants combination.* Mild alkaline product with soft metal protection.* Contains 500 ppm QAC (Benzalkonium chloride) at recommended use rate. Benefits: * Suitable for manual and automated foam cleaning systems.* Mixed alkalinity sources provide broad-spectrum cleaning performance against many diverse soils.* Produces stable foam under marginal foam conditions.* Solvent action provides cutting and emulsifying action against fats, oils and greases.* Contains QAC biocide for full sanitising action at 500 ppm at 2% use concentration.* Safe to use on most soft metals.* Suitable for manual cleaning tasks. Directions for use: * Foam Cleaning – Apply at 1 – 3% v/v (10 – 30 ml/ltr) in water dependent on soil type. Recommended use rate – 2% v/v (20 ml/ltr).* Manual Cleaning – Dilute to 2 – 10% v/v (20 – 100 ml/ltr) in water for general application.* FRONTLINE can also be sprayed, used with mops or in a soak tank. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Ethasan - 1L/5L/20L
Item Code: OP400$22.74 – $180.52ETHASAN is an alcohol-based sanitising compound for use in all areas of food processing industries. It is non-perfumed,non-coloured, non-thickened, and non-irritating. ETHASAN can also be used as a mid-shift evaporating disinfectant inhigh-risk food processing environments, or in moisture sensitive areas.Features:• Gives greater than 99.999% reduction of common pathogenic bacteria within 60 seconds• Easily dispensed.• Ready to use.• No rinsing of surfaces necessary (except where stipulated by MPI C43 approval).Benefits:• Spray is active against all common food poisoning bacteria, including: Salmonella, E Coli, Cronobacter Sakazakiiand Listeria.• Is active against common food spoilage bacteria. Alcohol based sanitisers of this type have also shown to beaffective against many viruses, including influenza, hepatitis and HIV.• Non-corrosive, and leaves no residue after evaporation.Directions for use:• Spray evenly onto surface with low pressure sprayer or via a trigger spray bottle.Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Microsan Q.A.C based sanitiser - 20L/200L/1000L
Item Code: OP654$102.54 – $2,409.07MICROSAN is a liquid quaternary ammonium compound (QAC) sanitiser, exhibiting efficacy against a wide range of organisms.Features:• Quaternary ammonium Sanitiser• Broad Range of Efficacy• Near neutral pH in RTU Form• Residual activity on surfaces• Detergent propertiesBenefits: • Can be used in most food applications• Fast acting and stable• Non-corrosive for all food premise surfaces• Excellent penetration of cracks and crevices• Easily and accurately dispensed Directions for use: • Ensure all pre-cleaned surfaces are rinsed thoroughly.• Sanitising : For equipment, aprons etc. at 20 mls to 10 ltrs water (200 ppm QAC).• Disinfecting : Hard Surfaces at 40 mls to 10 ltrs water (400 ppm QAC). Porous Surfaces at 80 mls to 10 ltrs water (800 ppm QAC).• Footbaths: footbaths or deodorising drains, waste bins etc. at 80 mls to 10 ltrs water (800 ppm QAC).• Food contact surfaces must be thoroughly rinsed with potable water prior to reuse.• CAUTION: Detergents containing anionic surfactants will neutralise the sanitising ability of MICROSAN. Ensure these are rinsed away thoroughly before applying sanitiser. Please click on 'Resources' tab above for all approvals and data sheetsAsureQuality Approved Organic Input -
Chillsan - 5L/20L
Item Code: OP690$72.56 – $237.61Chillsan is a specially formulated blend of detergents, bactericide and activator and is used for cleaning and disinfection of chiller and freezer units in the Food and Beverage industry. Chillsan works by forming a slow dissolving stable film on contact with water, or by absorption of atmospheric moisture which slowly releases the active material. Regular usage of Chillsan will help keep refrigeration units clean and greatly reduce the risk of Listeria becoming established. Chillsan is safe to use on most materials, including aluminium, copper and Sil-fos.Directions for use:Chillsan is applied by spraying it undiluted, directly on to the surfaces of the chiller unit to give a thin covering. This includes coils, fins, condensate trays and drains and other water – resistant components. Application should be repeated periodically. DO NOT rinse off. We strongly recommend that, due to the complexity of these units, application is only carried out by refrigeration technicians or similarly trained personnel.Please click on 'Resources' tab above for all approvals and data sheets -
Presto - 5L/20L/200L
Item Code: OP240$19.23 – $460.43PRESTO is an all purpose, neutral detergent that can be used on any water washable hard surface to remove general dirt and greasy soils, and rinse easily.Features:* Contains a mixture of anionic and nonionic surfactants, and mild alkalis* Contains no NPE’s or formaldehyde based preservatives* Non scented* Good level of active ingredientsBenefits:* Great degreasing and emulsifying action on greasy soils and general dirt* Environmentally sound* Suitable for use in food processing facilities* Good performance at an economical use rateDirections for use:* General cleaning: Use at 4 mls/ltr of warm/hot water. For extra greasy or heavily soiled items, use at up to 20 mls/ltr. Do not mix this detergent with disinfectants, as it will reduce both products effectiveness. As per conditions of a C38 Approval, no product or packaging can be present in the room during cleaning, and cleaned objects must be rinsed with potable water before production starts.Please click on 'Resources' tab above for all approvals and data sheets -
Magnafoam - 20L/200L/1000L
Item Code: OP050$148.13 – $3,863.72MAGNAFOAM is a heavy duty chlorinated alkaline foaming detergent. MAGNAFOAM is designed to be used as a foam cleaner and sanitiser in food processing premises.FEATURES *High strength caustic soda base to saponify fats and cut through grease.*Concentrated, powerful formula.*Contains at least 350ppm FAC @ 1% solution at time of manufacture.*Contains special additive to help chlorine “wet out” faster on surfaces.*Contains phosphate-free sequestrant and water conditioning agents.*High foaming.BENEFITS *Removes the majority of food-processing type soils encountered.*Works fast – reduces cleaning time.*Very economical in use – excellent results at low use rates.*Stable chlorine source for attacking protein and sanitising surfaces.*Will work well in medium-hard water, and rinse easily without spotting or dulling stainless steel surfaces.*High, stable foam allows effective one-pass coverage.DIRECTIONS FOR USEPre-rinse equipment to remove gross soil, before applying MAGNAFOAM. Use MAGNAFOAM mixed at 0.5 – 3.0% (5 – 30 mls/Ltr) in water no hotter than 45 degrees C. The use concentration is dependent on soil type and conditions – consult your Account Manager for the correct rate for your situation. Apply through foaming equipment or via manual application and leave to dwell for 5 – 15 minutes, scrub surface, then rinse off with cold-warm potable water. In large processing rooms, no edible product or packaging material can be present in the area during cleaning, as per conditions of a C38 approval.TYPICAL SPECIFICATIONSForm: Pale yellow liquid with faint chlorine odour.pH: 13.5 (@ 1% solution).Specific Gravity: 1.2Foam: High.Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Securedet - 5L/20L/200L/1000L
Item Code: OP620$41.66 – $4,926.44SECUREDET is a very effective, concentrated cleaner and sanitizer, for use in food processing facilities, where the use of a chlorinated product is undesirable, or protection of aluminum and soft metals is needed.SECUREDET is excellent at removing fats, proteins and oils from all hard surfaces, and contains a high level of QAC to sanitise as it cleans.SECUREDET is also suited for cleaning all exterior surfaces of trucks and the interior of refrigerated trailers, poultry and livestock trailers and bulk cartage units for product and foodstuffs, to help provide additional security to the food-chain.Features: • High, stable foam.• Contains no caustics, metasilicates, ethanolamines or solvents.• Cleans and sanitises in one step.• Effective against both gram positive and gram-negative bacteria, moulds and fungi, at 1% v/v.• Contains a high level of sequestrants and chelatants.• Can be used via foam, spray, soak, scrub or mop methods. Benefits: • Clings to vertical surfaces for longer.• Safe on aluminum and most hard surfaces.• Versatile “all in one” product that can be used in multiple ways for multiple tasks in food process cleaning.• Proven sanitising ability with short contact time.• Can be used in soft water, hard water and seawater. Keeps soil in suspension, and rinses easily. Directions for use:Do not mix SECUREDET with any other chemicals. Remove gross soil from surfaces before applying. SECUREDET can be diluted with either cold or hot water.Please click on 'Resources' tab above for all approvals and data sheets. AsureQuality Approved Organic Input -
Ultrakleen HF - 20L/200L/1000L
Item Code: OP320$153.55 – $4,209.05ULTRAKLEEN HF is a strong alkali foam cleaner with added solvency and sequestering ability. ULTRAKLEEN HF is designed to remove difficult soiling from processing equipment in the Food Industry.Features: * Caustic soda base to attack fats, oils and grease build ups.* Added solvent increases grease stripping ability.* Blend of sequestering and chelating agents ensures removal of complex soils, and easy rinsing.* High, stable foam profile.* Effective at low temperatures. Benefits: * Removes highly tarred and carbonaceous soils – e.g. smokehouses.* Foam remains on surface for longer, giving more effective clean.* Effectiveness at low temperatures reduces energy usage and condensation problems.* Can be used as a first-step cleaner for areas of heavy fat and oil build ups, where a chlorinated cleaner is undesirable. Directions for use: * Manual Cleaning - Use ULTRAKLEEN HF at 0.5-2.0% (5-20 mls/ltr) in warm (30-40°) water. Scrub or mop the surface, and leave solution in contact with it for 5-15 minutes. Rinse off with cold or warm potable water.* Foam Cleaning – Use ULTRAKLEEN HF at 1.0-2.0% (10-20 mls//ltr). Apply to vertical surfaces from the bottom up, and leave in contact for 15-20 minutes. Agitate where necessary with a brush or scourer, then rinse off with cold or warm potable water.* Used with the correct antifoam additive, ULTRAKLEEN HF has also proved to be an excellent heavy duty cleaner for unsealed floors when used through an auto-scrubber. Consult your Account Manager for specific use instructions. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Tech 5820 Powder Alkaline Cleaner - 20 Kg
Item Code: OPL420$192.79TECH 5820 is a powerful alkali cleaner, primarily designed for use in cleaning hooks, gambrels and skids used in the meat-processing industry. TECH 5820 can also be used for remedial maintenance cleaning and for degreasing factory floors that have accumulated build upFeatures:* Contains sodium hydroxide and sodium metasilicate for dual-alkaline performance.* Contains sequestrants and water conditioning agents.* Readily soluble.* Removes fat, proteins, rust, oil and rail grease from ferrous metal surfaces.Benefits:* Metasilicate content helps retain alkalinity and provides a level of soft metal protection.* Sequestrant and specialty surfactant mixture keeps soil from re-depositing, aids in reducing scale build up, andhelps solution to “wet out” without excess foaming.* Safer to store and handle than a liquid solution.* Economical and fast acting.Directions for use:* Depending on the type and severity of the soil, concentration rates will vary. However, a typicalrecommendation for hooks and gambrels would be between 15-20% (150-200 grams/litre of water) at atemperature of 85-100°C for 10 minutes. More time should be allowed for very heavily soiled items.* To prepare a tank, fill it with water, and heat to 50-60°C. Start adding the powder slowly at this point, bysprinkling over the surface of the water with a scoop. (See note below.) As the water heats, continue adding thepowder until the correct amount is in the tank. Stir the solution slowly with a stainless-steel stirrer to ensurethat the powder is completely dissolved. Once the water has reached the target operating temperature, thetank is ready for use.- Do NOT add large volumes of this product to the tank all at once. Add small amounts gradually.- Wear full PPE for this operation. Refer to the SDS.Please click on 'Resources' tab above for all approvals and data sheets$192.79 (Excl. GST) -
Suresan sanitiser - 20L/200L/1000L
Item Code: OP660$137.72 – $5,149.84SURESAN is a blend of amphoteric biocide, builders and surfactants, which provides an extremely effective broad spectrum bactericide with good detergency.SURESAN has been formulated for use in any open-area sanitising application within the Food, Dairy and Beverage industries and is recommended for use where QAC based sanitisers are not allowed or where a high performance and cost effective solution is needed.Features: • High soil and water-hardness tolerance• Good detergency• Fast acting• High efficacy at recommended use rate of 1%• Free rinsing• Low alkaline pH at in-use strength Benefits: • Effective sanitation even in the presence of food residue or hard water• Works quickly and rinses quickly, saving time• Cost effective in use, compared to other non-QAC alternatives• Will not corrode equipment like the acid/amphoterics, acid/anionics, and peracetic acids can. Directions for use: • SURESAN should be used at 1.0% v/v (10mls/Ltr), mixed in cold or hot water and applied to previously cleaned surfaces. SURESAN can be applied via spray or foam method or used in a soak-tub situation and in footbaths, boot and apron dips etc., where gear is cleaned prior to treatment.• SURESAN should be used at 2.0% v/v (20mls/Ltr) for fogging applications and when targeting yeasts and moulds. In these cases, leave SURESAN on the treated surface for at least 30 minutes.• SURESAN can be left to air-dry on the surface as long as the surface is thoroughly rinsed with potable water before production next starts. In any case, leave SURESAN in contact with the surface for at least 10 minutes before rinsing. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Terminex
Item Code: OP103$69.45 – $1,666.58Terminex is a powerful sanitiser based on chlorine dioxide, designed for use in food processing premises. It can be used both as a ‘break the cycle’ sanitiser and problem solver for areas showing persistently high micro counts, and for applying directly to different foodstuffs as an antimicrobial agent.Features: * Broad spectrum effectiveness* No pre-mixing of components required – simply dilute and use* Tested to give an average >6 log reduction within 30 seconds on Campylobacter jejuni, Escherichia coli, Lactobacillus casei, Listeria monocytogenes and Salmonella menston. This is when used at 0.5% v/v* Will actively attack and break down bio-films.* Ultimately degrades to sodium chloride (salt). Benefits: * Effective against bacteria, spores, viruses, mould and fungi at economical use rates* Easy and safe to store, dilute and use. Not classified as Dangerous Goods* Will not form films or residue on surfaces and is non-corrosive at in-use rates* Non foaming – can be used for small scale CIP sanitising* Extremely quick and lethal mode of action, yet safe to use* Has a proven track-record of solving problems and eliminating bio-films that other commonly used sanitisers, such as QAC and chlorine cannot* Great for use as a ‘break the cycle’ sanitiser where QAC is routinely used.* Useful for application as an antimicrobial processing aid on certain foodstuffs, where a quick reduction in microbes is needed but residual effect is not required. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Tenax Ultra - 20L/200L/1000L
Item Code: OP506$185.72 – $6,900.63TENAX® Ultra is a star performer from a range of new generation TENAX® chemicals that have been designed to give prolonged adherence to vertical and horizontal surfaces, thereby making full use of the chemical energy available. The outcome of this extended contact time is a superior cleaning result to what has previously been available, which allows you to reduce the other inputs involved in cleaning, such as manual labour, hot water, and time. TENAX® Ultra has been formulated to deal with very high levels of fatty, greasy, oily and proteinaceous soiling, and in most cases, will remove protein and fatty films without the need to manually scrub or pre-rinse with hot water. TENAX® Ultra has been shown to also be excellent at removing tarred and carbonaceous soils, where fats and proteins have been heat denatured or burnt on. TENAX® Ultra will cope with very high levels of water hardness, and rinses freely.Features: * Long residence time, particularly on vertical and intricate surfaces* Concentrated, and cost-effective at in-use rates* Very good wetting ability Benefits: * No re-application of chemical necessary* Peace of mind that hard to clean areas have had exposure to chemical for the recommended time* Lowers your total cost of cleaning, as it performs more of the cleaning task by itself, allowing you to minimise the other inputs* Wets out soils and works fast and completely Directions for use: * TENAX® Ultra should not be used on soft metals such as aluminium, copper or brass* TENAX® Ultra should be applied at concentrations in the range of 5-20% v/v (50-200 mls/ltr), dependent on the soil level to be tackled. Most applications will require only 5% v/v concentration. (Concentrations below 5% may result in inadequate thickening when diluted, leading to poor residence time on surfaces). Only mix TENAX Ultra with cold/ambient water – not hot* TENAX® Ultra can be applied via standard spray or air-assisted foam application equipment. Leave TENAX® Ultra to dwell on surfaces for 10-15 minutes before rinsing. TENAX® Ultra will rinse more quickly from surfaces if you use warm/hot water to rinse instead of cold* For use directions specific to your application, consult your Hygiene Technologies representative* SPECIAL PRECAUTIONS: - Do not store at extremes of temperature or in direct sunlight. Always leave containers sealed tightly – do not leave open to the air* Always mix very thoroughly with water before applying. Preferably dose through automated equipment Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Deep Blue Q.A.C based sanitiser - 20L/200L/1000L
Item Code: OP652$216.47 – $8,565.85DEEP BLUE is a highly concentrated Benzalkonioum chloride (QAC) based sanitiser which also contains wetting and foam boosting agents and sequestrants. As its name suggests, it is a dark purple-blue in colour.Features: • Contains 300,000 ppm QAC in undiluted form.• Broad range of efficacy.• Near neutral pH in RTU form.• Exhibits residual activity once applied.• Has detergent properties and can be used in areas of medium-hard water. Benefits: • Can be used in most food processing applications.• Very economical sanitation, due to its concentrated form. Can be diluted up to 1:1,500 for general equipment sanitation.• Stable and non-corrosive.• Excellent penetration, especially on porous surfaces.• Easily and accurately dispensed.• Blue colour show visual presence of sanitiser in footbath applications.• Concentrated nature saves on storage, freight and packaging. Directions for use: • Ensure all pre-cleaned surfaces are rinsed thoroughly.• For floors, panel walls, benches etc, add 15mls of DEEP BLUE TO 10 ltrs of water (450 ppm available QAC).• For porous surfaces such as plastic chopping boards, rubber belts or concrete walls, or to deodorize waste bins, add 30mls of DEEP BLUE to 10 ltrs of water (900 ppm available QAC).• To treat footbaths, add 3 mls of DEEP BLUE per ltr of water (900 ppm available QAC).• Food contact surfaces must be thoroughly rinsed with potable water prior to reuse.• DEEP BLUE can be applied through a low pressure sprayer or through foaming equipment. Because of the concentrated nature of DEEP BLUE, ensure it has fully dispersed in water before applying.• CAUTION: Detergents containing anionic surfactants will neutralise the sanitising ability of DEEP BLUE. Ensure these are rinsed away thoroughly before applying sanitiser. Please click on 'Resources' tab above for all approvals and data sheetsAsureQuality Approved Organic Input -
Opal Presto Cold Detergent - 20 Ltr
Item Code: OP242-20$67.49PRESTO COLD is an all purpose, neutral detergent that can be used on any water washable hard surface to remove general dirt and greasy soils, and rinse easily. It is specially formulated to retain it’s thin, pumpable viscosity at refrigeration temperatures.Features:• Contains a mixture of anionic and nonionic surfactants, and mild alkalis• Contains no NPE’s or formaldehyde based preservatives• Non scented• Good level of active ingredients• Retains a pumpable viscosity at refrigeration temperaturesBenefits:• Great degreasing and emulsifying action on greasy soils and general dirt• Environmentally sound• Suitable for use in food processing facilities• Good performance at an economical use rateDirections for use:• General cleaning: Use at 4 mls/ltr of warm/hot water. For extra greasy or heavily soiled items, use at up to 20 mls/ltr. Do not mix this detergent with disinfectants, as it will reduce both products effectiveness.Please click on 'Resources' tab above for all approvals and data sheets$67.49 (Excl. GST) -
1000 ml Ethasan 70-30 Labelled Empty Spray Bottle
Item Code: HT031$17.60This is not just a standard spray bottle, but one especially for the Ethasan products. This is an empty bottle for you to refill from the Ethasan container and has a trigger with solvent resistant seals in it.The label has a synthetic stock and is laminated to ensure the any Ethasan on the outside of the bottle won't remove the text like you experience with paper labels.$17.60 (Excl. GST) -
Hyposan 135 - 5L/20L/200L
Item Code: OP442$26.42 – $572.87HYPOSAN 135 is a high strength chlorinated liquid which can be used for many cleaning and sanitising applications in the food and beverage processing industry. It exhibits broad-spectrum, antimicrobial action, and is effective at low use rates.Features: * High strength chlorine sanitiser* Non foaming* Breaks down protein soils in alkaline solutions Benefits: * Will clean and whiten resistant surfaces.* Powerful removal of mould soil.* Effective sanitiser against all microbial forms.* Can be used alone or as an additive to alkaline cleaning solutions.* Economical use rates. Directions for use: * For Sanitising Stainless Steel Processing Equipment – Use HYPOSAN 135 at 200 ppm for not less than two minutes, then rinse with potable water. (See table below).* If treating potable water, ensure the concentration of HYPOSAN 135 at final point of use, conforms to the stated limits contained in potable water directives. ppm Chlorine% HYPOSAN 135Concentration of HYPOSAN 1352000.22 mls/ltr4000.44 mls/ltr8000.88 mls/ltr10001.010 mls/ltrPlease click on 'Resources' tab above for all approvals and data sheets -
Tech 345 Alkaline CIP Detergent - 15L/200L/1000L
Item Code: OP472$145.71 – $3,752.24TECH 345 is a concentrated heavy duty built liquid caustic detergent formulated for CIP and recirculationcleaning of varied dairy, beverage and food industry processing equipment. Tech 345 is quick acting, odourless and non-foaming. Tech 345 contains 45% w/w high purity membrane-grade caustic soda and very effective chelating agents. Freezing point is approximately 8°C.Features:• High sodium hydroxide content provides good organic soil removal properties• Contains chelating and suspending agents• Odourless and non-foamingBenefits:• Concentrated nature ensures low in-use concentrations and costs• Quickly breaks up and suspends soils• Liquid – ease of dosing• Free rinsingDirections for use:• Use at between 0.5 – 2.0% v/v (5 – 20 mls/ltr) for most applications.• A 1% v/v solution of Tech 345 in soft water, will equal approximately 40,000 uS/cm @ 25°C.• Use-concentration, circulation time and temperature are all dependent on what has been processed in the circuit prior to cleaning, so contact a Hygiene Technologies representative for specific use instructions for your situation if you are unsure.• All items cleaned must be rinsed with potable water before re-usePlease click on 'Resources' tab above for all approvals and data sheets -
Tech 545 Alkaline CIP Detergent - 15L/200L/1000L
Item Code: OP470$121.02 – $3,723.14TECH 545 is a concentrated alkaline detergent designed for CIP and recirculation cleaning of dairy, beverage and food industry processing equipment. Tech 545 provides rapid wetting and emulsifying performance with free rinsing properties due to its specialist “zero foaming” surfactant and has excellent chelating properties. Tech 545 contains 45% w/w high purity membrane-grade caustic soda. Freezing point is approximately 8°C.Features:• High sodium hydroxide content provides good organic soil removal properties• Good soil suspension• Odourless and non-foaming• Contains wetting agentsBenefits:• Concentrated nature ensures low in-use concentrations and costs• Quickly breaks up and suspends soils• Liquid – ease of dosing• Wetting agents reduce surface tension which improves the cleaning performance and enhances rinsingDirections for use:• Use at between 0.5 – 2.0% v/v (5 – 20 mls/ltr) for most applications.• A 1% v/v solution of Tech 545 in soft water, will equal approximately 40,000 uS/cm @ 25°C.• Use-concentration, circulation time and temperature are all dependent on what has been processed in the circuit prior to cleaning, so contact a Hygiene Technologies representative for specific use instructions for your situation if you are unsure.• All items cleaned must be rinsed with potable water before re-usePlease click on 'Resources' tab above for all approvals and data sheets
