Warewash

STERIDRY is a highly concentrated rinse agent for use with mechanical dishwashing operations in areas of soft-medium water hardness.Features:* Premium, concentrated formulation.* Effective under a wide range of operating conditions.Benefits:* Increases productivity and dishware hygiene by promoting rapid, complete drying.* Leaves glasses sparkling clear and free of water spots* Combats foaming* Maximum economy due to high concentration of activesDirections for use:* STERIDRY is normally injected automatically into the final rinse water of dishmachines at a concentration of 0.1 – 0.3 mls/Ltr, at temperatures of 80-90ᵒC, using Hygiene Technologies automatic dispensing equipment, or integral dosing pumps if fitted. It may also be applied manually into the rinse aid reservoir of smaller dishmachines.Please click on 'Resources' tab above for all approvals and data sheets

STERIDET is a concentrated liquid dishmachine detergent, specially formulated to provide excellent soil removal in medium-hard water conditions. STERIDET is suitable for use in a wide range of ware-wash machines, from under-bench glass-washers to large tunnel-washers, and all sizes in between. STERIDET also has application as an alkaline CIP detergent in certain situations in food processing equipment. Do not use STERIDET on alkali sensitive items such as copper, brass, aluminium or rubber.Features:* Concentrated, caustic soda based detergent.* Contains a high level of three different scale control agents.Benefits:* Cuts through grease and dried on food.* Being highly concentrated gives greater economy in use.* Prevents scaling of the dish-machine in medium to hard water conditions.Directions for use:* STERIDET is normally applied using Hygiene Technologies auto-dispensing equipment, however it can be used in conjunction with integral dosing pumps where fitted. To ensure perfect cleaning results, dose at the recommended rates below, suited to your local conditions.- For soft water (0-60ppm hardness)/light soiling 1 ml/ltr (0.1% v/v)- For moderately hard water (60-140ppm hardness)/medium soiling 2 ml/ltr (0.2% v/v)- For medium hard water (140-250ppm hardness)/heavier soiling 3 ml/ltr (0.3% v/v)- For hard water (250ppm + hardness)/heavy soiling 4 ml/ltr (0.4% v/v)* For food-processing CIP applications, specific instructions will be given for your situation by your HTL representative. Typical use rates for these applications are 0.5 - 2.0% v/v (5 - 20 mls/ltr)Please click on 'Resources' tab above for all approvals and data sheets