Sanitisers
Showing all 13 results
-
Manual Dispenser, Alcofoam
Item Code: OP874$28.18White, wall mounted stylish dispenser, lockable. Quality design ensures long trouble-free service life. Compatible with 1 Ltr Soft Bottle Refills for Alcofoam Instant Hand Sanitiser.$28.18 (Excl. GST) -
Ethasan - 1L/5L/20L
Item Code: OP400$22.74 – $180.52ETHASAN is an alcohol-based sanitising compound for use in all areas of food processing industries. It is non-perfumed,non-coloured, non-thickened, and non-irritating. ETHASAN can also be used as a mid-shift evaporating disinfectant inhigh-risk food processing environments, or in moisture sensitive areas.Features:• Gives greater than 99.999% reduction of common pathogenic bacteria within 60 seconds• Easily dispensed.• Ready to use.• No rinsing of surfaces necessary (except where stipulated by MPI C43 approval).Benefits:• Spray is active against all common food poisoning bacteria, including: Salmonella, E Coli, Cronobacter Sakazakiiand Listeria.• Is active against common food spoilage bacteria. Alcohol based sanitisers of this type have also shown to beaffective against many viruses, including influenza, hepatitis and HIV.• Non-corrosive, and leaves no residue after evaporation.Directions for use:• Spray evenly onto surface with low pressure sprayer or via a trigger spray bottle.Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Microsan Q.A.C based sanitiser - 20L/200L/1000L
Item Code: OP654$102.54 – $2,409.07MICROSAN is a liquid quaternary ammonium compound (QAC) sanitiser, exhibiting efficacy against a wide range of organisms.Features:• Quaternary ammonium Sanitiser• Broad Range of Efficacy• Near neutral pH in RTU Form• Residual activity on surfaces• Detergent propertiesBenefits: • Can be used in most food applications• Fast acting and stable• Non-corrosive for all food premise surfaces• Excellent penetration of cracks and crevices• Easily and accurately dispensed Directions for use: • Ensure all pre-cleaned surfaces are rinsed thoroughly.• Sanitising : For equipment, aprons etc. at 20 mls to 10 ltrs water (200 ppm QAC).• Disinfecting : Hard Surfaces at 40 mls to 10 ltrs water (400 ppm QAC). Porous Surfaces at 80 mls to 10 ltrs water (800 ppm QAC).• Footbaths: footbaths or deodorising drains, waste bins etc. at 80 mls to 10 ltrs water (800 ppm QAC).• Food contact surfaces must be thoroughly rinsed with potable water prior to reuse.• CAUTION: Detergents containing anionic surfactants will neutralise the sanitising ability of MICROSAN. Ensure these are rinsed away thoroughly before applying sanitiser. Please click on 'Resources' tab above for all approvals and data sheetsAsureQuality Approved Organic Input -
Chillsan - 5L/20L
Item Code: OP690$72.56 – $237.61Chillsan is a specially formulated blend of detergents, bactericide and activator and is used for cleaning and disinfection of chiller and freezer units in the Food and Beverage industry. Chillsan works by forming a slow dissolving stable film on contact with water, or by absorption of atmospheric moisture which slowly releases the active material. Regular usage of Chillsan will help keep refrigeration units clean and greatly reduce the risk of Listeria becoming established. Chillsan is safe to use on most materials, including aluminium, copper and Sil-fos.Directions for use:Chillsan is applied by spraying it undiluted, directly on to the surfaces of the chiller unit to give a thin covering. This includes coils, fins, condensate trays and drains and other water – resistant components. Application should be repeated periodically. DO NOT rinse off. We strongly recommend that, due to the complexity of these units, application is only carried out by refrigeration technicians or similarly trained personnel.Please click on 'Resources' tab above for all approvals and data sheets -
Securedet - 5L/20L/200L/1000L
Item Code: OP620$41.66 – $4,926.44SECUREDET is a very effective, concentrated cleaner and sanitizer, for use in food processing facilities, where the use of a chlorinated product is undesirable, or protection of aluminum and soft metals is needed.SECUREDET is excellent at removing fats, proteins and oils from all hard surfaces, and contains a high level of QAC to sanitise as it cleans.SECUREDET is also suited for cleaning all exterior surfaces of trucks and the interior of refrigerated trailers, poultry and livestock trailers and bulk cartage units for product and foodstuffs, to help provide additional security to the food-chain.Features: • High, stable foam.• Contains no caustics, metasilicates, ethanolamines or solvents.• Cleans and sanitises in one step.• Effective against both gram positive and gram-negative bacteria, moulds and fungi, at 1% v/v.• Contains a high level of sequestrants and chelatants.• Can be used via foam, spray, soak, scrub or mop methods. Benefits: • Clings to vertical surfaces for longer.• Safe on aluminum and most hard surfaces.• Versatile “all in one” product that can be used in multiple ways for multiple tasks in food process cleaning.• Proven sanitising ability with short contact time.• Can be used in soft water, hard water and seawater. Keeps soil in suspension, and rinses easily. Directions for use:Do not mix SECUREDET with any other chemicals. Remove gross soil from surfaces before applying. SECUREDET can be diluted with either cold or hot water.Please click on 'Resources' tab above for all approvals and data sheets. AsureQuality Approved Organic Input -
Suresan sanitiser - 20L/200L/1000L
Item Code: OP660$137.72 – $5,149.84SURESAN is a blend of amphoteric biocide, builders and surfactants, which provides an extremely effective broad spectrum bactericide with good detergency.SURESAN has been formulated for use in any open-area sanitising application within the Food, Dairy and Beverage industries and is recommended for use where QAC based sanitisers are not allowed or where a high performance and cost effective solution is needed.Features: • High soil and water-hardness tolerance• Good detergency• Fast acting• High efficacy at recommended use rate of 1%• Free rinsing• Low alkaline pH at in-use strength Benefits: • Effective sanitation even in the presence of food residue or hard water• Works quickly and rinses quickly, saving time• Cost effective in use, compared to other non-QAC alternatives• Will not corrode equipment like the acid/amphoterics, acid/anionics, and peracetic acids can. Directions for use: • SURESAN should be used at 1.0% v/v (10mls/Ltr), mixed in cold or hot water and applied to previously cleaned surfaces. SURESAN can be applied via spray or foam method or used in a soak-tub situation and in footbaths, boot and apron dips etc., where gear is cleaned prior to treatment.• SURESAN should be used at 2.0% v/v (20mls/Ltr) for fogging applications and when targeting yeasts and moulds. In these cases, leave SURESAN on the treated surface for at least 30 minutes.• SURESAN can be left to air-dry on the surface as long as the surface is thoroughly rinsed with potable water before production next starts. In any case, leave SURESAN in contact with the surface for at least 10 minutes before rinsing. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Terminex
Item Code: OP103$69.45 – $1,666.58Terminex is a powerful sanitiser based on chlorine dioxide, designed for use in food processing premises. It can be used both as a ‘break the cycle’ sanitiser and problem solver for areas showing persistently high micro counts, and for applying directly to different foodstuffs as an antimicrobial agent.Features: * Broad spectrum effectiveness* No pre-mixing of components required – simply dilute and use* Tested to give an average >6 log reduction within 30 seconds on Campylobacter jejuni, Escherichia coli, Lactobacillus casei, Listeria monocytogenes and Salmonella menston. This is when used at 0.5% v/v* Will actively attack and break down bio-films.* Ultimately degrades to sodium chloride (salt). Benefits: * Effective against bacteria, spores, viruses, mould and fungi at economical use rates* Easy and safe to store, dilute and use. Not classified as Dangerous Goods* Will not form films or residue on surfaces and is non-corrosive at in-use rates* Non foaming – can be used for small scale CIP sanitising* Extremely quick and lethal mode of action, yet safe to use* Has a proven track-record of solving problems and eliminating bio-films that other commonly used sanitisers, such as QAC and chlorine cannot* Great for use as a ‘break the cycle’ sanitiser where QAC is routinely used.* Useful for application as an antimicrobial processing aid on certain foodstuffs, where a quick reduction in microbes is needed but residual effect is not required. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Deep Blue Q.A.C based sanitiser - 20L/200L/1000L
Item Code: OP652$216.47 – $8,565.85DEEP BLUE is a highly concentrated Benzalkonioum chloride (QAC) based sanitiser which also contains wetting and foam boosting agents and sequestrants. As its name suggests, it is a dark purple-blue in colour.Features: • Contains 300,000 ppm QAC in undiluted form.• Broad range of efficacy.• Near neutral pH in RTU form.• Exhibits residual activity once applied.• Has detergent properties and can be used in areas of medium-hard water. Benefits: • Can be used in most food processing applications.• Very economical sanitation, due to its concentrated form. Can be diluted up to 1:1,500 for general equipment sanitation.• Stable and non-corrosive.• Excellent penetration, especially on porous surfaces.• Easily and accurately dispensed.• Blue colour show visual presence of sanitiser in footbath applications.• Concentrated nature saves on storage, freight and packaging. Directions for use: • Ensure all pre-cleaned surfaces are rinsed thoroughly.• For floors, panel walls, benches etc, add 15mls of DEEP BLUE TO 10 ltrs of water (450 ppm available QAC).• For porous surfaces such as plastic chopping boards, rubber belts or concrete walls, or to deodorize waste bins, add 30mls of DEEP BLUE to 10 ltrs of water (900 ppm available QAC).• To treat footbaths, add 3 mls of DEEP BLUE per ltr of water (900 ppm available QAC).• Food contact surfaces must be thoroughly rinsed with potable water prior to reuse.• DEEP BLUE can be applied through a low pressure sprayer or through foaming equipment. Because of the concentrated nature of DEEP BLUE, ensure it has fully dispersed in water before applying.• CAUTION: Detergents containing anionic surfactants will neutralise the sanitising ability of DEEP BLUE. Ensure these are rinsed away thoroughly before applying sanitiser. Please click on 'Resources' tab above for all approvals and data sheetsAsureQuality Approved Organic Input -
Hyposan 135 - 5L/20L/200L
Item Code: OP442$26.42 – $572.87HYPOSAN 135 is a high strength chlorinated liquid which can be used for many cleaning and sanitising applications in the food and beverage processing industry. It exhibits broad-spectrum, antimicrobial action, and is effective at low use rates.Features: * High strength chlorine sanitiser* Non foaming* Breaks down protein soils in alkaline solutions Benefits: * Will clean and whiten resistant surfaces.* Powerful removal of mould soil.* Effective sanitiser against all microbial forms.* Can be used alone or as an additive to alkaline cleaning solutions.* Economical use rates. Directions for use: * For Sanitising Stainless Steel Processing Equipment – Use HYPOSAN 135 at 200 ppm for not less than two minutes, then rinse with potable water. (See table below).* If treating potable water, ensure the concentration of HYPOSAN 135 at final point of use, conforms to the stated limits contained in potable water directives. ppm Chlorine% HYPOSAN 135Concentration of HYPOSAN 1352000.22 mls/ltr4000.44 mls/ltr8000.88 mls/ltr10001.010 mls/ltrPlease click on 'Resources' tab above for all approvals and data sheets -
Ethasan 70-30 - 5L/20L
Item Code: OP570$56.89 – $190.15ETHASAN 70-30 is an alcohol-based sanitising compound for use in all areas of food processing industries. It is nonperfumed,non-coloured, non-thickened, and non-irritating. ETHASAN 70-30 can also be used as a mid-shiftevaporating disinfectant in high-risk food processing environments, or in moisture sensitive areas.Features: • Internationally recognised that 70% Ethanol solution is the ultimate blend for biocidal performance• Easily dispensed.• Ready to use.• No rinsing of surfaces necessary (as per MPI Dairy Recognition document). Benefits: • Spray is active against all common food poisoning bacteria, including: Salmonella, E Coli, Cronobacter Sakazakiiand Listeria.• Is active against common food spoilage bacteria. Alcohol based sanitisers of this type have also shown to beeffective against many viruses, including influenza, hepatitis and HIV.• Non-corrosive, and leaves no residue after evaporation. Directions for use: • Spray evenly onto surface with low pressure sprayer or via a trigger spray bottle. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Opal Actex Premium Sanitiser - 20 Ltr
Item Code: OP572-20$204.40ACTEX is a specialist disinfectant that contains 70% v/v ethanol coupled with a proprietary acidifier that gives the well-known biocidal effects of ethanol a substantial boost.This means Actex now offers a previously unavailable combination of a disinfectant that works quickly and evaporates to leave a surface dry, with the power of an extended contact-time product that typically is rinsed off after 10-15 minutes and designed for wet areas.Actex was designed to offer two unique advantages to food and beverage processors: To be highly effective at destroying young biofilms on process and environmental surfaces that would normally require wet scrubbing and agitation, high heat or the use of concentrated oxidising agents. To work quickly and evaporate, leaving no residues such as quaternary compounds on the surfaces, meaning there is no need to introduce any moisture to rinse it off.FEATURES • Contains 70% v/v Ethanol • Works quickly against vegetative microorganisms and the biofilms they create and shelter in • Low pH yet compatible with food production surfaces and equipment • Leaves no residue of concern on food-contact surfaces after evaporation • Can be used on food-contact surfaces during production breaks or shift changes or during pre-operative checks, with no need to rinse (non-dairy only)BENEFITS • Evaporates after use and leaves surfaces dry – ideal for moisture sensitive areas • Peace of mind that treated surfaces are free of biofilm and their associated issues • Independently tested to be non-corrosive to all commonly used surface materials in food and beverage processing (not recommended for use on galvanized surfaces or natural fibres) • Helps to reduce microbial build-up on surfaces during production and decrease food-safety risks – ideal for RTE and premium chilled food producersAPPROVALS • MPI Approved C42 (All animal products except dairy) • AsureQuality Assessed for food/beverage/dairy factory use H4597 EFFICACY DATAActex contains 70% v/v Ethanol in an aqueous solution, who’s efficacy against different classes of micro- organisms is well known and documented in scientific literature.To show the boosted efficacy of Actex compared to ordinary 70% v/v Ethanol, we commissioned Massey University’s School of Food and Advanced Technology to run comparative testing with their specialist biofilm reactor and testing methods.Two well known pathogens of particular concern to the infant formula and RTE foods industry were chosen, due to their known disposition to form biofilms to protect themselves from the effects of disinfectants and other stresses. These were Cronobacter Sakazaaki and Listeria Monocytogenes.Environmental isolates of these two organisms from production sites around the country were used, and in the case of the L. Mono were screened to find the strongest biofilm producers. These were then grown on stainless steel coupons and treated to produce biofilms (method available on request). These were subjected to a 1-minute exposure time via dipping in standard 70% v/v Ethanol and Actex, with the results shown below Cronobacter Sakazaaki StrainCONTROL (Log CFU/cm2)70/30& ETHANOL (Log CFU/cm2)ACTEX (Log CFU/cm2)ASQ 55.30.60ASQ 94.51.20ASQ 104.62.60NZRM 504.700Listeria MonocytogenesCONTROL (Log CFU/cm2)70/30 ETHANOL (Log CFU/cm2)ACTEX (Log CFU/cm2)NCTC 79733.521.320EM-073.873.050EM-083.483.040M53.1800$204.40 (Excl. GST) -
Opal Revive Acid Cleaner
Item Code: OP502$165.10 – $1,934.55Revive is a powerful blend of different acids and surface-active agents designed to remove surface rust, scale and stone deposits from stainless steel surfaces in the food and beverage industry. Revive works quickly and leaves stainless steel surfaces brighter and can be applied via air-assisted foamer, sprayer or used to soak components in a tank situation.DIRECTIONS FOR USE:Use only on acid resistant surfaces and components. If necessary, pre-clean surfaces with a suitable alkaline cleaner to remove organic soil deposits and rinse well before applying Revive.Foam or spray application: Apply at between 2-20% v/v (20-200mls per litre of water) depending on degree of soiling to be removed and length of time since last acid clean. Leave in contact for minimum of 10 minutes, then rinse surfaces thoroughly with potable water and allow to air-dry.Soak tank application: Make up solution in container at 10-20% v/v (100-200 mls per Litre of water) and submerge pre-cleaned items fully to soak. If possible, heat the solution and maintain it at 60°C to speed up cleaning time. Do not leave items to soak for more than 30 minutes at a time, before rinsing thoroughly with potable water and allowing to air-dry. -
Acitrol Acidifier - 1000L
Item Code: OP908-1000$1,846.79Acitrol is an optimum blend of different food-grade and processing-aid acids. Designed to be spray applied to fresh offal and render-material that is transported off site for further processing. Acitrol works by lowering the pH on the surface of the material to give a biostatic effect, thereby prolonging the freshness until receival at further processing. The optimum blend of acids gives good microbial control, with less corrosion and safety issues at an economical price.DIRECTIONS FOR USEAcitrol is designed to be spray applied, undiluted on to fresh offal and render material, either within the exit auger or directly into the receiving bin. Ensure spray system is set up to give even and consistent coverage of material.$1846.79 (Excl. GST)
