Food industry chemicals
Showing 21–35 of 35 results
-
Tech 298 Acid Cleaner - 20L/200L
Item Code: OP460$182.93 – $1,148.78TECH 298 is a concentrated blend of Nitric and Phosphoric acid, designed for use in CIP applications in the food – processing industry. TECH 298 is used in the “acid phase” of a CIP cycle, to remove scale and stone deposits from process lines and surfaces.Features: * Optimum blend of two strong acids* Non-foaming* Concentrated product* Nitric acid has biocidal properties Benefits: * Nitric acid is excellent at removing inorganic soils, while Phosphoric acid provides a degree of detergency and passivation.* Will not cause foam build ups in CIP circuits.* Use at low use concentrations for an economical clean.* Provides additional biocidal control, due to the oxidising properties of the Nitric acid content, and the low operating pH. Directions for use: * For normal CIP cleaning, or soak cleaning of acid-resistant components, prepare a 0.5 – 1.0% w/v solution (50-100 grams) per 10 ltrs of water. Circulate as required (normally 15-20 minutes), at a temperature of 30-50C. Rinse lines or surfaces with potable water after cleaning, and before production starts. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Parameter Cleaner Sanitiser - 20L/200L/1000L
Item Code: OP458$132.52 – $4,445.90PARAMETER is a concentrated, low foaming, broad spectrum chlorinated alkaline liquid detergent. PARAMETER is designed for use in CIP, recirculation cleaning and spray-washing applications of food processing equipment.Features: • Provides excellent detergency, soil suspension and disinfection properties for CIP applications across all sectors of the food industry.• Highly effective at protein removal, quickly breaks down and suspends soils.*Contains at least 320ppm FAC @ 1% solution at time of manufacture.• Contains wetting agents to reduce surface tension and caustic carry-over.• Provides broad spectrum biocidal action.Benefits: • Active against a wide variety of food soils.• Hard water tolerant, ensuring scale free equipment and improved efficiency. Free rinsing, saving rinse water.• Low foaming under high turbulence and in the presence of protein.Directions for use: • For the majority of CIP and spray-washing applications, PARAMETER is used at between 0.2 – 1.0% v/v (200ml –1000ml / 100ltrs) in water up to 65 – 75°C. Specific rates and circulation times can be given for your specific application by your Hygiene Technologies representative. All cleaning with PARAMETER should be followed by a potable water rinse before production starts.Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Tech 1630 H.D. Acid Detergent - 20L/200L
Item Code: OP416$183.43 – $1,518.59TECH 1630 is a heavy duty acid detergent designed for use in CIP and immersion cleaning of mineral and protein soils from ferrous metals.Features:* Odourless and free-rinsing.* Low foaming.* Very good wetting and penetrating properties.Benefits:* Concentrated acid detergent.* Phosphoric acid and surfactant blend will remove mineral deposits and aid in the removal of organic soiling also.* Removes scale and brightens mild steel.* Excellent soil penetration.* Non-corrosive to stainless steel at in-use dilutions.Directions for use:* CIP: For the removal of scale, milkstone and mineral deposits use at 0.5 – 0.7% v/v; temperature 65 – 75°C and cleaning time approximately 15 minutes.* Immersion Cleaning: Typically a concentration 20% v/v is required. Temperature should be from ambient to 60°C with an immersion time from 5 minutes to 1 hour depending on degree of soiling. Rinse with water after cleaning step.Please click on 'Resources' tab above for all approvals and data sheets -
Ethasan 70-30 - 5L/20L
Item Code: OP570$56.89 – $190.15ETHASAN 70-30 is an alcohol-based sanitising compound for use in all areas of food processing industries. It is nonperfumed,non-coloured, non-thickened, and non-irritating. ETHASAN 70-30 can also be used as a mid-shiftevaporating disinfectant in high-risk food processing environments, or in moisture sensitive areas.Features: • Internationally recognised that 70% Ethanol solution is the ultimate blend for biocidal performance• Easily dispensed.• Ready to use.• No rinsing of surfaces necessary (as per MPI Dairy Recognition document). Benefits: • Spray is active against all common food poisoning bacteria, including: Salmonella, E Coli, Cronobacter Sakazakiiand Listeria.• Is active against common food spoilage bacteria. Alcohol based sanitisers of this type have also shown to beeffective against many viruses, including influenza, hepatitis and HIV.• Non-corrosive, and leaves no residue after evaporation. Directions for use: • Spray evenly onto surface with low pressure sprayer or via a trigger spray bottle. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Lifft Natural Abrasive Creme Cleaner - 5 Ltr
Item Code: OP504-5$74.88Powerful heavy-duty cleanser with a fine natural abrasive. Ideal for removing build-ups of difficult to remove soils, without harsh scratching of the surface. Unscented, so can be used in food-processing areas, as well as in kitchens and bathrooms. DIRECTIONS FOR USEApply undiluted, using a damp cloth, sponge or scourer. While the abrasive is fine-grade, prolonged use or heavy scrubbing on plastic, painted, laminated or chromed surfaces is not recommended. When used in food production areas, all surfaces must be rinsed thoroughly with potable water before production starts, as per conditions of an MPI C41 Approval. MPI APPROVED C41 (All animal product except dairy)$74.88 (Excl. GST) -
Opal Actex Premium Sanitiser - 20 Ltr
Item Code: OP572-20$204.40ACTEX is a specialist disinfectant that contains 70% v/v ethanol coupled with a proprietary acidifier that gives the well-known biocidal effects of ethanol a substantial boost.This means Actex now offers a previously unavailable combination of a disinfectant that works quickly and evaporates to leave a surface dry, with the power of an extended contact-time product that typically is rinsed off after 10-15 minutes and designed for wet areas.Actex was designed to offer two unique advantages to food and beverage processors: To be highly effective at destroying young biofilms on process and environmental surfaces that would normally require wet scrubbing and agitation, high heat or the use of concentrated oxidising agents. To work quickly and evaporate, leaving no residues such as quaternary compounds on the surfaces, meaning there is no need to introduce any moisture to rinse it off.FEATURES • Contains 70% v/v Ethanol • Works quickly against vegetative microorganisms and the biofilms they create and shelter in • Low pH yet compatible with food production surfaces and equipment • Leaves no residue of concern on food-contact surfaces after evaporation • Can be used on food-contact surfaces during production breaks or shift changes or during pre-operative checks, with no need to rinse (non-dairy only)BENEFITS • Evaporates after use and leaves surfaces dry – ideal for moisture sensitive areas • Peace of mind that treated surfaces are free of biofilm and their associated issues • Independently tested to be non-corrosive to all commonly used surface materials in food and beverage processing (not recommended for use on galvanized surfaces or natural fibres) • Helps to reduce microbial build-up on surfaces during production and decrease food-safety risks – ideal for RTE and premium chilled food producersAPPROVALS • MPI Approved C42 (All animal products except dairy) • AsureQuality Assessed for food/beverage/dairy factory use H4597 EFFICACY DATAActex contains 70% v/v Ethanol in an aqueous solution, who’s efficacy against different classes of micro- organisms is well known and documented in scientific literature.To show the boosted efficacy of Actex compared to ordinary 70% v/v Ethanol, we commissioned Massey University’s School of Food and Advanced Technology to run comparative testing with their specialist biofilm reactor and testing methods.Two well known pathogens of particular concern to the infant formula and RTE foods industry were chosen, due to their known disposition to form biofilms to protect themselves from the effects of disinfectants and other stresses. These were Cronobacter Sakazaaki and Listeria Monocytogenes.Environmental isolates of these two organisms from production sites around the country were used, and in the case of the L. Mono were screened to find the strongest biofilm producers. These were then grown on stainless steel coupons and treated to produce biofilms (method available on request). These were subjected to a 1-minute exposure time via dipping in standard 70% v/v Ethanol and Actex, with the results shown below Cronobacter Sakazaaki StrainCONTROL (Log CFU/cm2)70/30& ETHANOL (Log CFU/cm2)ACTEX (Log CFU/cm2)ASQ 55.30.60ASQ 94.51.20ASQ 104.62.60NZRM 504.700Listeria MonocytogenesCONTROL (Log CFU/cm2)70/30 ETHANOL (Log CFU/cm2)ACTEX (Log CFU/cm2)NCTC 79733.521.320EM-073.873.050EM-083.483.040M53.1800$204.40 (Excl. GST) -
Redex Acid Cleaner - 20 Ltr
Item Code: OP422-20$208.29REDEX is a phosphoric acid-based detergent designed for removing surface rust from ferrous metals and it will also provide some protection against subsequent re-rusting. REDEX can also be used to remove hardness and stone deposits and oxide films from steel and other acid-resistant surfaces. REDEX contains wetting and emulsifying surfactants and is coloured red to provide a visual indication not to store near or mix with strong alkalis.DIRECTIONS FOR USERust removal - Use Redex diluted to 33%-50% v/v (300mls-500mls/litre), dependent on level of rust. Apply to surface for 5-30 minutes to remove light film. Agitate if practical and rinse off with cold water. Food contact surfaces must be thoroughly rinsed with potable water before production starts.MPI APPROVED C31 (All animal product except dairy)$208.29 (Excl. GST) -
Opal Nitrigel Acid Cleaner - 20 Ltr
Item Code: OP070-20$136.40Nitrigel is a thixotropic gel product that utilises a powerful blend of acids to remove heavy scale from stainless steel equipment in the Food, Beverage and Dairy industries. Because Nitrigel sticks to vertical surfaces for extended periods, it allows the chemistry to complete the task without the need for manual agitation.DIRECTIONS FOR USENitrigel is used neat and can be applied via a tank style foamer or a pressurised sprayer. Leave Nitrigel on the surface for at least 20-30 minutes before rinsing off thoroughly with potable water. Do not use on mild steel.MPI Approved C31 (All animal product except dairy)$136.40 (Excl. GST) -
Opal Revive Acid Cleaner
Item Code: OP502$165.10 – $1,934.55Revive is a powerful blend of different acids and surface-active agents designed to remove surface rust, scale and stone deposits from stainless steel surfaces in the food and beverage industry. Revive works quickly and leaves stainless steel surfaces brighter and can be applied via air-assisted foamer, sprayer or used to soak components in a tank situation.DIRECTIONS FOR USE:Use only on acid resistant surfaces and components. If necessary, pre-clean surfaces with a suitable alkaline cleaner to remove organic soil deposits and rinse well before applying Revive.Foam or spray application: Apply at between 2-20% v/v (20-200mls per litre of water) depending on degree of soiling to be removed and length of time since last acid clean. Leave in contact for minimum of 10 minutes, then rinse surfaces thoroughly with potable water and allow to air-dry.Soak tank application: Make up solution in container at 10-20% v/v (100-200 mls per Litre of water) and submerge pre-cleaned items fully to soak. If possible, heat the solution and maintain it at 60°C to speed up cleaning time. Do not leave items to soak for more than 30 minutes at a time, before rinsing thoroughly with potable water and allowing to air-dry. -
Acitrol Acidifier - 1000L
Item Code: OP908-1000$3,149.50Acitrol is an optimum blend of different food-grade and processing-aid acids. Designed to be spray applied to fresh offal and render-material that is transported off site for further processing. Acitrol works by lowering the pH on the surface of the material to give a biostatic effect, thereby prolonging the freshness until receival at further processing. The optimum blend of acids gives good microbial control, with less corrosion and safety issues at an economical price.DIRECTIONS FOR USEAcitrol is designed to be spray applied, undiluted on to fresh offal and render material, either within the exit auger or directly into the receiving bin. Ensure spray system is set up to give even and consistent coverage of material.$3149.50 (Excl. GST) -
Tech 30AF - 25 Kg
Item Code: OP912$1,022.51Tech 30AF is a high-performance food grade antifoam for food processing and manufacturing use, and is easy to handle and dose, and is non-hazardous. Having 30% total actives means Tech 30AF is very economical in use. Non-allergen, non-GMO and USFDA 21 CFR compliance for Tech 30AF is available on request. DIRECTIONS FOR USETech 30AF can be added to the foaming mixture, baths, formulations or waste/process water either manually or with a dosing pump. Adjust the addition rate to optimise defoaming. Tech 30AF may be diluted with water prior to use, but the diluted mixture will require agitation or circulation over time to stop separation. Mix well before use. Tech 30AF can be used up to a level of 33ppm of the volume of water it is added to – this will give a maximum of 10ppm of the silicone active on the finished food product, which complies with current applicable limits. Tech 30AF is stable for 12 months when undiluted and stored below 30°C.$1022.51 (Excl. GST) -
Neutrasan Chlorinated Sanitiser - 15kg
Item Code: OP753-15$273.00Neutrasan is designed to be an alternative to the strongly alkaline chlorinated powders used in the food and beverage industry. It offers a concentrated and shelf-stable source of Hypochlorous acid at a near-neutral pH. This allows it to work as a sanitiser and bleaching agent at optimum levels, and also ensures less chance of corrosion to aluminium and no negative impact to waste-water pH levels. Neutrasan contains surfactants and sequestrants to aid in cleaning.$273.00 (Excl. GST) -
Ultrad HA - 400g Tin
Item Code: HT806$117.20THE DRY DISINFECTANT TO FIGHT BIOCONTAMINATION AND PRESERVE THE MICROBIOLOGICAL BALANCE• Bactericide and fungicide disinfectant with hydroxyacetic acid (HA)• Dispersion by ULTRADIFFUSION® ADVANTAGES• Standalone system, safe for operators: no human presence required• Quick and easy to use• Water saving• Non-corrosive• Substance naturally found in plants$117.20 (Excl. GST) -
Ultrad HA - 40g Tin
Item Code: HT805$37.10THE DRY DISINFECTANT TO FIGHT BIOCONTAMINATION AND PRESERVE THE MICROBIOLOGICAL BALANCE• Bactericide and fungicide disinfectant with hydroxyacetic acid (HA)• Dispersion by ULTRADIFFUSION® ADVANTAGES• Standalone system, safe for operators: no human presence required• Quick and easy to use• Water saving• Non-corrosive• Substance naturally found in plants$37.10 (Excl. GST) -
Zoono Z71, 5L
Item Code: CL002$149.80Zoono Z-71 surface sanitiser forms a long lasting antimicrobial coating that bonds to surfaces and protects against a variety of pathogens, including H1N1, norovirus, E coli, MRSA & Salmonella, as well as mould, fungi and algae. Ideal for use within hospitality, healthcare, commercial kitchens, education, livestock, business, residential, water treatment & laundry.Directions for Use:Clean and dry the surface prior to application.Spray entire surface or spray on microfibre cloth and apply evenly, make sure the surface is completely covered.Allow to dry (this may take approx 10mins at ambient)Re-apply weekly or monthly as required.$149.80 (Excl. GST)
