Chemicals & Equipment
Showing 121–130 of 130 results
-
Digiklenz Hand Cleaner 2 x 4 ltrs/ctn
Item Code: OP700$178.31DIGIKLENZ Industrial Hand Cleaner - Formulated to effectively remove heavy industrial, mechanical and engineering type soil while ensuring maximum protection for your skin and the environment. The biodegradable walnut-shell scrubbers used are a completely renewable resource, will not clog drains or persist in the environment, and are not abrasive to your skin – unlike the pumice and poly-beads used in other products. Effective soy based surfactants means this does not need to rely on strong solvents like d-Limonene and hydrocarbon derived compounds like kerosene to work (these compounds are classified as skin sensitisers and irritants). Contains no alkali-soaps and has a pH of 6.5 which is close to skins natural pH. Compatible with Industrial Dispenser.$178.31 (Excl. GST) -
Opal Revive Acid Cleaner
Item Code: OP502$165.10 – $1,934.55Revive is a powerful blend of different acids and surface-active agents designed to remove surface rust, scale and stone deposits from stainless steel surfaces in the food and beverage industry. Revive works quickly and leaves stainless steel surfaces brighter and can be applied via air-assisted foamer, sprayer or used to soak components in a tank situation.DIRECTIONS FOR USE:Use only on acid resistant surfaces and components. If necessary, pre-clean surfaces with a suitable alkaline cleaner to remove organic soil deposits and rinse well before applying Revive.Foam or spray application: Apply at between 2-20% v/v (20-200mls per litre of water) depending on degree of soiling to be removed and length of time since last acid clean. Leave in contact for minimum of 10 minutes, then rinse surfaces thoroughly with potable water and allow to air-dry.Soak tank application: Make up solution in container at 10-20% v/v (100-200 mls per Litre of water) and submerge pre-cleaned items fully to soak. If possible, heat the solution and maintain it at 60°C to speed up cleaning time. Do not leave items to soak for more than 30 minutes at a time, before rinsing thoroughly with potable water and allowing to air-dry. -
Acitrol Acidifier - 1000L
Item Code: OP908-1000$3,149.50Acitrol is an optimum blend of different food-grade and processing-aid acids. Designed to be spray applied to fresh offal and render-material that is transported off site for further processing. Acitrol works by lowering the pH on the surface of the material to give a biostatic effect, thereby prolonging the freshness until receival at further processing. The optimum blend of acids gives good microbial control, with less corrosion and safety issues at an economical price.DIRECTIONS FOR USEAcitrol is designed to be spray applied, undiluted on to fresh offal and render material, either within the exit auger or directly into the receiving bin. Ensure spray system is set up to give even and consistent coverage of material.$3149.50 (Excl. GST) -
Tech 30AF - 25 Kg
Item Code: OP912$1,022.51Tech 30AF is a high-performance food grade antifoam for food processing and manufacturing use, and is easy to handle and dose, and is non-hazardous. Having 30% total actives means Tech 30AF is very economical in use. Non-allergen, non-GMO and USFDA 21 CFR compliance for Tech 30AF is available on request. DIRECTIONS FOR USETech 30AF can be added to the foaming mixture, baths, formulations or waste/process water either manually or with a dosing pump. Adjust the addition rate to optimise defoaming. Tech 30AF may be diluted with water prior to use, but the diluted mixture will require agitation or circulation over time to stop separation. Mix well before use. Tech 30AF can be used up to a level of 33ppm of the volume of water it is added to – this will give a maximum of 10ppm of the silicone active on the finished food product, which complies with current applicable limits. Tech 30AF is stable for 12 months when undiluted and stored below 30°C.$1022.51 (Excl. GST) -
LP Foamer - 2 Product
Item Code: HT860$3,441.50This heavy duty, dual product foamer is a great piece of Kiwi engineering that performs better than any other foamer we’ve seen globally. It truly is amazing to see the foam quality from this with pretty average water pressure.It’s all stainless-steel construction has a simple, yet effective design that will offer years of maintenance free operation as there is so little to go wrong – no regulators or non-return valves with wearing seals. The innovative venturi design has ability to suck chemical even at low water pressure – with six bar water pressure, it is drawing nearly one bar of vacuum!The simple air adjustment system means the foam can be adjusted quickly and easily if required by the operator.$3441.50 (Excl. GST) -
Neutrasan Chlorinated Sanitiser - 15kg
Item Code: OP753-15$273.00Neutrasan is designed to be an alternative to the strongly alkaline chlorinated powders used in the food and beverage industry. It offers a concentrated and shelf-stable source of Hypochlorous acid at a near-neutral pH. This allows it to work as a sanitiser and bleaching agent at optimum levels, and also ensures less chance of corrosion to aluminium and no negative impact to waste-water pH levels. Neutrasan contains surfactants and sequestrants to aid in cleaning.$273.00 (Excl. GST) -
Profill Chemical Proportioner
Item Code: DM178$432.77ProFill is a single or dual product sink dispenser to dilute product into a kitchen sing with the turn of a ball valve.Stainless steel cover with large label area for product ID and operating instructionsSmall overall size makes for easy out of the way installationEasy to access for service without removing the unit from the wallAll brass and stainless steel manifold for greater durability and reliabilityWater inlet easily switches from left or right sideSeparate models for Action Gap or Air Gap backflow protectionDual or single water source inlets to control water temperature separately$432.77 (Excl. GST) -
Ultrad HA - 400g Tin
Item Code: HT806$117.20THE DRY DISINFECTANT TO FIGHT BIOCONTAMINATION AND PRESERVE THE MICROBIOLOGICAL BALANCE• Bactericide and fungicide disinfectant with hydroxyacetic acid (HA)• Dispersion by ULTRADIFFUSION® ADVANTAGES• Standalone system, safe for operators: no human presence required• Quick and easy to use• Water saving• Non-corrosive• Substance naturally found in plants$117.20 (Excl. GST) -
Ultrad HA - 40g Tin
Item Code: HT805$37.10THE DRY DISINFECTANT TO FIGHT BIOCONTAMINATION AND PRESERVE THE MICROBIOLOGICAL BALANCE• Bactericide and fungicide disinfectant with hydroxyacetic acid (HA)• Dispersion by ULTRADIFFUSION® ADVANTAGES• Standalone system, safe for operators: no human presence required• Quick and easy to use• Water saving• Non-corrosive• Substance naturally found in plants$37.10 (Excl. GST) -
Zoono Z71, 5L
Item Code: CL002$149.80Zoono Z-71 surface sanitiser forms a long lasting antimicrobial coating that bonds to surfaces and protects against a variety of pathogens, including H1N1, norovirus, E coli, MRSA & Salmonella, as well as mould, fungi and algae. Ideal for use within hospitality, healthcare, commercial kitchens, education, livestock, business, residential, water treatment & laundry.Directions for Use:Clean and dry the surface prior to application.Spray entire surface or spray on microfibre cloth and apply evenly, make sure the surface is completely covered.Allow to dry (this may take approx 10mins at ambient)Re-apply weekly or monthly as required.$149.80 (Excl. GST)