Chemicals & Equipment
Showing 41–60 of 130 results
-
Image Walkway - 5L/20L
Item Code: OP065$22.70 – $87.74IMAGE WALKWAY is a concentrated, low-alkaline, general purpose hard surface floor cleaner. Designed for use through auto-scrubbers or for general mopping and manual scrubbing of floors. IMAGE WALKWAY can be used on all hard floor types and finishes, except unsealed marble and terrazzo.FEATURES:* Very safe to use* Has a pleasant fresh, sweet perfume* Low foamingBENEFITS:* Designed for use through auto-scrubbers or general mopping and manual scrubbing of floors* Remove all common soils and dirt* Ideal for cleaning polished floors* Due to its low alkalinity it will not damage floor polish coatings DIRECTIONS FOR USE:For either mopping or auto-scrubbing operations -Light duty cleaning: Use at 1 part in 100 parts water. This is 10 ml per litre of water.Heavy duty cleaning: Use at 1 part in 50 parts water. This is 20 ml per litre of water.Please click on 'Resources' tab above for all approvals and data sheets -
Microtex sanitiser - 5L
Item Code: OP566$44.84Microtex Sanitiser is designed for use in conjunction with Fibreclean Micro and Macro products, but can be usedon most other common textiles. Its primary function is to destroy potentially harmful organisms on the textilesurface and to impart a pleasant fragrance.DIRECTIONS FOR USE:Usually used at 1.0% v/v in cold water for soak-sanitising. Consult your Hygiene Technologies representative forspecific use instructions for your situation. -
Steridry Concentrated Dishwasher Rinse Aid - 10 Ltr
Item Code: OP518-10$116.41STERIDRY is a highly concentrated rinse agent for use with mechanical dishwashing operations in areas of soft-medium water hardness.Features:* Premium, concentrated formulation.* Effective under a wide range of operating conditions.Benefits:* Increases productivity and dishware hygiene by promoting rapid, complete drying.* Leaves glasses sparkling clear and free of water spots* Combats foaming* Maximum economy due to high concentration of activesDirections for use:* STERIDRY is normally injected automatically into the final rinse water of dishmachines at a concentration of 0.1 – 0.3 mls/Ltr, at temperatures of 80-90ᵒC, using Hygiene Technologies automatic dispensing equipment, or integral dosing pumps if fitted. It may also be applied manually into the rinse aid reservoir of smaller dishmachines.Please click on 'Resources' tab above for all approvals and data sheets$116.41 (Excl. GST) -
Enviromist - 5L/20L/200L
Item Code: OP300$27.53 – $925.97Enviromist is a highly effective spray and wipe cleaner which is suitable for cleaning hard surfaces in toilet/washroom areas, amenity areas and kitchens and cafeterias. Enviromist’s powerful formula will help to remove organic soiling in one pass and will not leave unsightly residual films on the surface afterwards.MPI APPROVED C32 (All animal product except dairy)DIRECTIONS FOR USEUse undiluted. Spray onto surface and leave to work for 30-60 seconds before wiping off. Not for use in edible product areas or food contact surfaces. -
500 ml Spray Bottle c/w Economy Trigger Spray
Item Code: WW040$5.12$5.12 (Excl. GST) -
Touchless Dispenser, Prevent
Item Code: OP882$82.11White, wall mounted stylish dispenser, lockable. Reliable sensor and quality design ensure long trouble-free service life. Takes 4 x C size batteries (not included).$82.11 (Excl. GST) -
Fibrerinse LA - 5L/20L
Item Code: OP564$193.33 – $676.12Fibrerinse® LA is a final rinse additive that provides sanitation to Fibreclean mops and cloths, when washed through commercial laundry machines. It acts as a residual sanitiser. DIRECTION FOR USEWherever possible, this product should be applied through an auto-dosing pump, that has been set up by a Hygiene Technologies representative. Typical use rates are between 0.5 - 1.25% of the dry weight of fabric. -
Magnafoam - 20L/200L/1000L
Item Code: OP050$148.13 – $3,863.72MAGNAFOAM is a heavy duty chlorinated alkaline foaming detergent. MAGNAFOAM is designed to be used as a foam cleaner and sanitiser in food processing premises.FEATURES *High strength caustic soda base to saponify fats and cut through grease.*Concentrated, powerful formula.*Contains at least 350ppm FAC @ 1% solution at time of manufacture.*Contains special additive to help chlorine “wet out” faster on surfaces.*Contains phosphate-free sequestrant and water conditioning agents.*High foaming.BENEFITS *Removes the majority of food-processing type soils encountered.*Works fast – reduces cleaning time.*Very economical in use – excellent results at low use rates.*Stable chlorine source for attacking protein and sanitising surfaces.*Will work well in medium-hard water, and rinse easily without spotting or dulling stainless steel surfaces.*High, stable foam allows effective one-pass coverage.DIRECTIONS FOR USEPre-rinse equipment to remove gross soil, before applying MAGNAFOAM. Use MAGNAFOAM mixed at 0.5 – 3.0% (5 – 30 mls/Ltr) in water no hotter than 45 degrees C. The use concentration is dependent on soil type and conditions – consult your Account Manager for the correct rate for your situation. Apply through foaming equipment or via manual application and leave to dwell for 5 – 15 minutes, scrub surface, then rinse off with cold-warm potable water. In large processing rooms, no edible product or packaging material can be present in the area during cleaning, as per conditions of a C38 approval.TYPICAL SPECIFICATIONSForm: Pale yellow liquid with faint chlorine odour.pH: 13.5 (@ 1% solution).Specific Gravity: 1.2Foam: High.Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Securedet - 5L/20L/200L/1000L
Item Code: OP620$41.66 – $4,926.44SECUREDET is a very effective, concentrated cleaner and sanitizer, for use in food processing facilities, where the use of a chlorinated product is undesirable, or protection of aluminum and soft metals is needed.SECUREDET is excellent at removing fats, proteins and oils from all hard surfaces, and contains a high level of QAC to sanitise as it cleans.SECUREDET is also suited for cleaning all exterior surfaces of trucks and the interior of refrigerated trailers, poultry and livestock trailers and bulk cartage units for product and foodstuffs, to help provide additional security to the food-chain.Features: • High, stable foam.• Contains no caustics, metasilicates, ethanolamines or solvents.• Cleans and sanitises in one step.• Effective against both gram positive and gram-negative bacteria, moulds and fungi, at 1% v/v.• Contains a high level of sequestrants and chelatants.• Can be used via foam, spray, soak, scrub or mop methods. Benefits: • Clings to vertical surfaces for longer.• Safe on aluminum and most hard surfaces.• Versatile “all in one” product that can be used in multiple ways for multiple tasks in food process cleaning.• Proven sanitising ability with short contact time.• Can be used in soft water, hard water and seawater. Keeps soil in suspension, and rinses easily. Directions for use:Do not mix SECUREDET with any other chemicals. Remove gross soil from surfaces before applying. SECUREDET can be diluted with either cold or hot water.Please click on 'Resources' tab above for all approvals and data sheets. AsureQuality Approved Organic Input -
Ultrakleen HF - 20L/200L/1000L
Item Code: OP320$153.55 – $4,209.05ULTRAKLEEN HF is a strong alkali foam cleaner with added solvency and sequestering ability. ULTRAKLEEN HF is designed to remove difficult soiling from processing equipment in the Food Industry.Features: * Caustic soda base to attack fats, oils and grease build ups.* Added solvent increases grease stripping ability.* Blend of sequestering and chelating agents ensures removal of complex soils, and easy rinsing.* High, stable foam profile.* Effective at low temperatures. Benefits: * Removes highly tarred and carbonaceous soils – e.g. smokehouses.* Foam remains on surface for longer, giving more effective clean.* Effectiveness at low temperatures reduces energy usage and condensation problems.* Can be used as a first-step cleaner for areas of heavy fat and oil build ups, where a chlorinated cleaner is undesirable. Directions for use: * Manual Cleaning - Use ULTRAKLEEN HF at 0.5-2.0% (5-20 mls/ltr) in warm (30-40°) water. Scrub or mop the surface, and leave solution in contact with it for 5-15 minutes. Rinse off with cold or warm potable water.* Foam Cleaning – Use ULTRAKLEEN HF at 1.0-2.0% (10-20 mls//ltr). Apply to vertical surfaces from the bottom up, and leave in contact for 15-20 minutes. Agitate where necessary with a brush or scourer, then rinse off with cold or warm potable water.* Used with the correct antifoam additive, ULTRAKLEEN HF has also proved to be an excellent heavy duty cleaner for unsealed floors when used through an auto-scrubber. Consult your Account Manager for specific use instructions. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Reflect premium glass cleaner - 5L/20L/200L
Item Code: OP500$30.57 – $800.33REFLECT is a premium glass cleaner that will remove grease, grime, oils and general dirt from glass, chrome and clear plastic surfaces, leaving a streak-free finish. REFLECT is quick drying and will help inhibit resoiling and fingerprints on the cleared surface.DIRECTIONS FOR USEUse sparingly and spray on undiluted, then wipe with a dry, clean lint-free cloth. For scrub and squeeze applications, can be used at a ratio of 1:20 (50mls per ltr of water). Use of this product in a food processing facility must adhere to the conditions of a C35 approval. -
Tropical Toilet & Bathroom Cleaner Concentrate, 5 Ltr
Item Code: OP710-5$115.52Tropical is an effective cleaner and sanitiser for toilets and acid-resistant washroom surfaces for removing dirt, hard-water scale and build up. Tropical has a very pleasant tropical-passionfruit fragrance that lingers after use, and will thicken up once diluted to it’s ready-to-use state, to give prolonged cling-time on surfaces. Because Tropical is a concentrate, it reduces environmental impact because less packaging and transport is required.DIRECTIONS FOR USETOILETS & URINALS - Fill 550ml spray bottle half-full with cold water. Dose 2 x 30ml pumps from the dispenser fitted to the 5 Ltr Concentrate bottle. Continue filling the bottle up to the 550ml mark with cold water. Shake bottle well to mix. Spray onto surfaces and leave for 10-15 minutes. Scrub if needed then flush thoroughly.$115.52 (Excl. GST) -
Tech 5820 Powder Alkaline Cleaner - 20 Kg
Item Code: OPL420$192.79TECH 5820 is a powerful alkali cleaner, primarily designed for use in cleaning hooks, gambrels and skids used in the meat-processing industry. TECH 5820 can also be used for remedial maintenance cleaning and for degreasing factory floors that have accumulated build upFeatures:* Contains sodium hydroxide and sodium metasilicate for dual-alkaline performance.* Contains sequestrants and water conditioning agents.* Readily soluble.* Removes fat, proteins, rust, oil and rail grease from ferrous metal surfaces.Benefits:* Metasilicate content helps retain alkalinity and provides a level of soft metal protection.* Sequestrant and specialty surfactant mixture keeps soil from re-depositing, aids in reducing scale build up, andhelps solution to “wet out” without excess foaming.* Safer to store and handle than a liquid solution.* Economical and fast acting.Directions for use:* Depending on the type and severity of the soil, concentration rates will vary. However, a typicalrecommendation for hooks and gambrels would be between 15-20% (150-200 grams/litre of water) at atemperature of 85-100°C for 10 minutes. More time should be allowed for very heavily soiled items.* To prepare a tank, fill it with water, and heat to 50-60°C. Start adding the powder slowly at this point, bysprinkling over the surface of the water with a scoop. (See note below.) As the water heats, continue adding thepowder until the correct amount is in the tank. Stir the solution slowly with a stainless-steel stirrer to ensurethat the powder is completely dissolved. Once the water has reached the target operating temperature, thetank is ready for use.- Do NOT add large volumes of this product to the tank all at once. Add small amounts gradually.- Wear full PPE for this operation. Refer to the SDS.Please click on 'Resources' tab above for all approvals and data sheets$192.79 (Excl. GST) -
Suresan sanitiser - 20L/200L/1000L
Item Code: OP660$137.72 – $5,149.84SURESAN is a blend of amphoteric biocide, builders and surfactants, which provides an extremely effective broad spectrum bactericide with good detergency.SURESAN has been formulated for use in any open-area sanitising application within the Food, Dairy and Beverage industries and is recommended for use where QAC based sanitisers are not allowed or where a high performance and cost effective solution is needed.Features: • High soil and water-hardness tolerance• Good detergency• Fast acting• High efficacy at recommended use rate of 1%• Free rinsing• Low alkaline pH at in-use strength Benefits: • Effective sanitation even in the presence of food residue or hard water• Works quickly and rinses quickly, saving time• Cost effective in use, compared to other non-QAC alternatives• Will not corrode equipment like the acid/amphoterics, acid/anionics, and peracetic acids can. Directions for use: • SURESAN should be used at 1.0% v/v (10mls/Ltr), mixed in cold or hot water and applied to previously cleaned surfaces. SURESAN can be applied via spray or foam method or used in a soak-tub situation and in footbaths, boot and apron dips etc., where gear is cleaned prior to treatment.• SURESAN should be used at 2.0% v/v (20mls/Ltr) for fogging applications and when targeting yeasts and moulds. In these cases, leave SURESAN on the treated surface for at least 30 minutes.• SURESAN can be left to air-dry on the surface as long as the surface is thoroughly rinsed with potable water before production next starts. In any case, leave SURESAN in contact with the surface for at least 10 minutes before rinsing. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Tropical Labelled Spray Bottle, 550 ml
Item Code: HT114$12.90$12.90 (Excl. GST) -
Terminex
Item Code: OP103$69.45 – $1,666.58Terminex is a powerful sanitiser based on chlorine dioxide, designed for use in food processing premises. It can be used both as a ‘break the cycle’ sanitiser and problem solver for areas showing persistently high micro counts, and for applying directly to different foodstuffs as an antimicrobial agent.Features: * Broad spectrum effectiveness* No pre-mixing of components required – simply dilute and use* Tested to give an average >6 log reduction within 30 seconds on Campylobacter jejuni, Escherichia coli, Lactobacillus casei, Listeria monocytogenes and Salmonella menston. This is when used at 0.5% v/v* Will actively attack and break down bio-films.* Ultimately degrades to sodium chloride (salt). Benefits: * Effective against bacteria, spores, viruses, mould and fungi at economical use rates* Easy and safe to store, dilute and use. Not classified as Dangerous Goods* Will not form films or residue on surfaces and is non-corrosive at in-use rates* Non foaming – can be used for small scale CIP sanitising* Extremely quick and lethal mode of action, yet safe to use* Has a proven track-record of solving problems and eliminating bio-films that other commonly used sanitisers, such as QAC and chlorine cannot* Great for use as a ‘break the cycle’ sanitiser where QAC is routinely used.* Useful for application as an antimicrobial processing aid on certain foodstuffs, where a quick reduction in microbes is needed but residual effect is not required. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Tenax Ultra - 20L/200L/1000L
Item Code: OP506$185.72 – $6,900.63TENAX® Ultra is a star performer from a range of new generation TENAX® chemicals that have been designed to give prolonged adherence to vertical and horizontal surfaces, thereby making full use of the chemical energy available. The outcome of this extended contact time is a superior cleaning result to what has previously been available, which allows you to reduce the other inputs involved in cleaning, such as manual labour, hot water, and time. TENAX® Ultra has been formulated to deal with very high levels of fatty, greasy, oily and proteinaceous soiling, and in most cases, will remove protein and fatty films without the need to manually scrub or pre-rinse with hot water. TENAX® Ultra has been shown to also be excellent at removing tarred and carbonaceous soils, where fats and proteins have been heat denatured or burnt on. TENAX® Ultra will cope with very high levels of water hardness, and rinses freely.Features: * Long residence time, particularly on vertical and intricate surfaces* Concentrated, and cost-effective at in-use rates* Very good wetting ability Benefits: * No re-application of chemical necessary* Peace of mind that hard to clean areas have had exposure to chemical for the recommended time* Lowers your total cost of cleaning, as it performs more of the cleaning task by itself, allowing you to minimise the other inputs* Wets out soils and works fast and completely Directions for use: * TENAX® Ultra should not be used on soft metals such as aluminium, copper or brass* TENAX® Ultra should be applied at concentrations in the range of 5-20% v/v (50-200 mls/ltr), dependent on the soil level to be tackled. Most applications will require only 5% v/v concentration. (Concentrations below 5% may result in inadequate thickening when diluted, leading to poor residence time on surfaces). Only mix TENAX Ultra with cold/ambient water – not hot* TENAX® Ultra can be applied via standard spray or air-assisted foam application equipment. Leave TENAX® Ultra to dwell on surfaces for 10-15 minutes before rinsing. TENAX® Ultra will rinse more quickly from surfaces if you use warm/hot water to rinse instead of cold* For use directions specific to your application, consult your Hygiene Technologies representative* SPECIAL PRECAUTIONS: - Do not store at extremes of temperature or in direct sunlight. Always leave containers sealed tightly – do not leave open to the air* Always mix very thoroughly with water before applying. Preferably dose through automated equipment Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Deep Blue Q.A.C based sanitiser - 20L/200L/1000L
Item Code: OP652$216.47 – $8,565.85DEEP BLUE is a highly concentrated Benzalkonioum chloride (QAC) based sanitiser which also contains wetting and foam boosting agents and sequestrants. As its name suggests, it is a dark purple-blue in colour.Features: • Contains 300,000 ppm QAC in undiluted form.• Broad range of efficacy.• Near neutral pH in RTU form.• Exhibits residual activity once applied.• Has detergent properties and can be used in areas of medium-hard water. Benefits: • Can be used in most food processing applications.• Very economical sanitation, due to its concentrated form. Can be diluted up to 1:1,500 for general equipment sanitation.• Stable and non-corrosive.• Excellent penetration, especially on porous surfaces.• Easily and accurately dispensed.• Blue colour show visual presence of sanitiser in footbath applications.• Concentrated nature saves on storage, freight and packaging. Directions for use: • Ensure all pre-cleaned surfaces are rinsed thoroughly.• For floors, panel walls, benches etc, add 15mls of DEEP BLUE TO 10 ltrs of water (450 ppm available QAC).• For porous surfaces such as plastic chopping boards, rubber belts or concrete walls, or to deodorize waste bins, add 30mls of DEEP BLUE to 10 ltrs of water (900 ppm available QAC).• To treat footbaths, add 3 mls of DEEP BLUE per ltr of water (900 ppm available QAC).• Food contact surfaces must be thoroughly rinsed with potable water prior to reuse.• DEEP BLUE can be applied through a low pressure sprayer or through foaming equipment. Because of the concentrated nature of DEEP BLUE, ensure it has fully dispersed in water before applying.• CAUTION: Detergents containing anionic surfactants will neutralise the sanitising ability of DEEP BLUE. Ensure these are rinsed away thoroughly before applying sanitiser. Please click on 'Resources' tab above for all approvals and data sheetsAsureQuality Approved Organic Input -
Touchless Dispenser, Alcofoam
Item Code: OP880$81.92White, wall mounted stylish dispenser, lockable. Reliable sensor and quality design ensure long trouble-free service life. Takes 4 x C size batteries (not included).$81.92 (Excl. GST) -
Opal Presto Cold Detergent - 20 Ltr
Item Code: OP242-20$67.49PRESTO COLD is an all purpose, neutral detergent that can be used on any water washable hard surface to remove general dirt and greasy soils, and rinse easily. It is specially formulated to retain it’s thin, pumpable viscosity at refrigeration temperatures.Features:• Contains a mixture of anionic and nonionic surfactants, and mild alkalis• Contains no NPE’s or formaldehyde based preservatives• Non scented• Good level of active ingredients• Retains a pumpable viscosity at refrigeration temperaturesBenefits:• Great degreasing and emulsifying action on greasy soils and general dirt• Environmentally sound• Suitable for use in food processing facilities• Good performance at an economical use rateDirections for use:• General cleaning: Use at 4 mls/ltr of warm/hot water. For extra greasy or heavily soiled items, use at up to 20 mls/ltr. Do not mix this detergent with disinfectants, as it will reduce both products effectiveness.Please click on 'Resources' tab above for all approvals and data sheets$67.49 (Excl. GST)