Chemical Safety Training | Hygiene Technologies

If you do not understand or unsure about anything, who should you ask to explain it?

Your partner.

Your supervisor.

Your dad.

Why do we use chemicals in our workplace?

So there is a balance of different hazards on site

They help make our jobs easier

Because MPI stipulate we have to

What could happen if you add a corrosive powder to hot water too quickly?

Could boil the water instantly and explode upwards.

Could suddenly turn into an oxidiser.

Could make the water turn purple.

What colour is the “Flammable Liquid” classification diamond, and what number is on it?

Yellow, 8.

Blue, 5.

Red, 3.

What is the similarity between a hack-saw and some toilet cleaner?

They are both very useful

They are both tools

They are both found in your workplace

Is a flammable chemical safe to get on my skin?

Yes, so long as it has the red diamond label on the container

Only if it's not in a concentrate product

Only if it has been designed for that purpose and it clearly states this on the label

When is a chemical or a tool most dangerous?

When they are not used how they are supposed to be used.

When they are both used at the same time.

When they are used underwater.

What does “SDS” stand for, and where should they be kept?

Serious Disease Sachets – kept in your department First Aid station

Sam’s Delicious Sausages – kept in your fridge

Safety Data Sheet – kept close to where chemicals are used or stored

If you spill a strong alkali on your skin, you must keep rinsing your skin with water until…

The slippery feeling has gone.

It is time to go home.

5 minutes is up.

Why are oxidisers less hazardous than flammables?

Because they are only available as powders.

Because you can add them to hot water.

They are not less hazardous, they can both be very hazardous if used incorrectly.

What does PPE stand for and in which section of the SDS can this be found listed?

Personal Private Email – Section 5 of the SDS

Particularly Protective Earmuffs – Section 11 of the SDS

Personal Protective Equipment – Section 8 of the SDS

A Corrosive chemical can be both…

An acid and a neutral.

An acid or an alkali.

A neutral and an alkali.

What footwear would be best to use if you had to clean up a chemical spill?

Gumboots

Jandals and socks

Any footwear is ok, so long as it has non-slip soles

If a chemical spill occurs, what is the correct procedure to follow?

Call the ambulance, then check if it is safe to clean up.

Warn others in the vicinity, then clean it up as quickly as possible, if it is safe to do so.

Clean it up before you go home.

Why should you blow your gloves up like a balloon before putting them on?

To see if they have any holes in them.

To amuse your workmates

To make them fit better.

In what state is a chemical normally the most hazardous?

When it is a concentrate.

When it is diluted with hot water.

When it is a red colour.

What should you do if you can’t find the name of the chemical on a container?

Assume it is the same as what you used yesterday.

Dilute it so it is safer to use.

Don’t use it and report it to your supervisor.

What are the two main sources of information about a chemical?

The label and your supervisor.

Google and Facebook.

The label and the SDS.

If your supervisor asks you to use a new chemical you haven't used before, should you?

Use it straight away in case you lose your job

Tell the supervisor to use it themselves first and let you know how it goes

Ask to have the safety and usage instructions explained to you first

When should we call the Emergency Contact number that is on the chemical label?

When the chemical has run out and you need some more.

When you see a fire starting in your workplace.

When someone has been hurt by the chemical but it’s not serious enough to call an ambulance.